Chandeliers of today aren’t justust fixtures for lighting,

However, they’re also great for decorative elements for interiors, but installing a chandelier can be quite difficult.

1.Open the package and examine each component according to instructions.

Since chandeliers are fixtures for lighting and decorative lights, they also contain many accessories.

It’s not well-known. New installers should check the components according to the installation instructions of the bulb.

If you are unable to locate the correct place, you can contact the merchant in time.

The customer should be in attendance when the host for lighting is opened. Installation can only be assured if the lighting does not present any issues.

Installation of the chandelier

1.First put together the lamp’s body of the chandelier, as well as thesurrounding arms of the lamp (where the lamp will be installed).

After disassembling the light strip, as illustrated in the photo above, you will be able to determine where the arms of the light could be placed.

When the lamp arms are connected after connecting the lamp arms, the lamp arms need to be securedone one at a time using an adjustable wrench. The lamp arms need to be evenly distributed following installation. Otherwise the installation will be complete. The chandelier should be tilted towards the larger side of the arm.

Connect the correct wires to the lamp arm. Make sure you do not connect the incorrect wire. If, however, you install a light bulb the light bulb is found to be defective. one of the light arms fails to light up and needs to be removed for maintenance.

4.Installed the slings, slings, and slings of the lamp body and chandelier. At this point the chandelier is constructed and then the base (i.e. the top plate) is mounted.

Install the ceiling light holder at the location you prefer for installation.

The procedure for installation is the same as that used for a ceiling lamp. The lamp holder is placed on the hole, and then pull it off. Next, use a drill drill into the hole. Install the lamp holder.

6.Connect the main power supply used for the ceiling to the chandelier power supply.

7.Then adjust the assembly height of the chandelier and assemble the accessories (glass bowl and shell) above the arm.

Install the decorative cover that is the cover at the base. Then start the power supply test to check whether it begins.

Pay particular attention to the following aspects:

Fix chandelier on ceiling hole

First, the first method for installing a chandelier is embedded. Install a sheet of metal over the ceiling. After that, attach a few protruding braces onto the back side of the LED panel light. After that, put the LED panel on the bracket that is in line with the metal sheet slot. It is able to be attached to the ceiling. However, due to differing thickness of the ceiling the height of the light surface and the bracket will need to be adjusted or else the light from the LED panel will be higher or lower than the ceiling’s surface after installation.

The second method of installation is fixed: first install a few screw holes on the ceiling, then slide the light fixture intothe ceiling frame and install it on the ceiling to fix the three sides. The panel light is placed into the slide-in fixed mounting frame. The fourth side is attached to the frame mounted with screws. Simple and quick.

The third method of installation is a wire hanging one: first install the hanging wire part on the ceiling and lock the screws (the hanging wire is installed at the factory.) The wire hanging is vertical and the elements are hanging from the back LED panel lighting. Installation is easy and cost-effective. Ask the consumer if they want to buy either standard or optional suspension parts.

Installation Precautions

1. The product operates on standard voltage, please do not over-do the range of working voltage;
2. Before installing, make sure that the power is switched off.
3. Make sure to read the instruction carefully before installing the product;
4. Be aware of electrical shockproof, water-proof and waterproof;
5. This product is best used indoors.

How do you install a chandelier with an integrated ceiling?

1. Decorate the connection device on wood bricks and iron components to adjust the height of the chandelier to the errors. You can make use of nails, screws, or a combination of these. The chandelier’s installation is close to being completed once you have completed the steps.
2. Pick the spot for the chandelier based on the height it is placed in your living space. So you’ll be able to avoid the need to embed wires into the ceiling.
3. The decorative material should be incorporated prior to the structural layer. Ensure that the position is exact and you can keep certain positions for the adjustment of the chandelier.
4. You need to connect slings, booms and connecting devices.

The last item:

Lighting chandeliers in commercial spaces in particular ones with low ceilings, is not recommended.

The majority of chandeliers available are currently emitting light upward, and it is recommended to use these with spotlights or downlights to create the traditional ceiling type.

Nowadays, most chandeliers employ GU10 series light bulbs as lighting sources. These bulbs are extremely powerful, but they cannot dissipate heat, and are more prone to breakage. The traditional E27 or E14 bulbs require a bigger lamp head and lamp shade, which can feel a little low.

It is recommended that you install a chandelier, which is convenient and practical. Of course, it’s possible to also adjust the light and temperature of the color.